Skip to content

The use guide

Photographed setups show where to place each tool, what to look for and how to control contact. Find the precautions for your object before starting.

Brushed steel sphere and folded cloth on a pale stone surface

These guides are for everyday product use. Follow the instructions supplied with your object for approved positions, settings, temperature and use limits. If use brings on pain, numbness or dizziness, stop.

Find your object

Large muscle areas

Sculptural Foam Roller

A short, supported roll

The numbered markers identify the parts and setup shown.
  1. Stable floor or mat
  2. Broad contact surface
  3. Short rolling path

Calves and other suitable large muscle areas

  1. Set up on the floor

    Place the roller on a stable surface. Sit with your hands and the other foot supporting your weight. Place one calf lightly on the roller, away from the knee and ankle.

  2. Keep the roll short

    Move slowly over a short, comfortable section of the muscle. Support your weight throughout and lighten the contact if it becomes uncomfortable.

  3. Lift before changing areas

    Lift off the roller to reposition. Stop if you feel sharp pain, tingling or numbness.

Use for
Gentle movement over an intact, comfortable muscle area that the product instructions allow.
Do not use
Joints, the spine, bony points, open skin, and any area that is injured or newly swollen.
Check with a professional first
Ask a healthcare professional before use if you have a recent fracture or operation, reduced sensation, or a history of blood clots. Leave unexplained swelling or pain alone until it is assessed.
View product

Percussion Massager Mini

Guide the round attachment

The numbered markers identify the parts and setup shown.
  1. Round attachment
  2. Power and setting
  3. Soft-touch grip

Large muscle areas permitted by the manual

  1. Inspect with the device off

    Read the model manual. Check that the permitted attachment is intact and seated properly, and that the device is dry and undamaged.

  2. Use light, moving contact

    Sit in a supported position. Use the lowest suitable setting allowed by the model, on a large muscle area such as the thigh if the manual permits it. Keep the head moving as directed.

  3. Switch off before changing parts

    Stop for pain, numbness, or tingling. Turn off and unplug the device before cleaning or changing an attachment.

Use for
Controlled contact on a large muscle area using an attachment and setting specified by the supplied manual.
Do not use
Head, face, neck, spine, joints, bones, broken skin, bruises and swollen or injured areas. Do not use over a known or suspected blood clot.
Check with a professional first
Ask a clinician first if you have an implanted device, clotting or bleeding concerns, take blood thinners, are pregnant, or are recovering from a recent operation or fracture.
View product

Dual-Density Massage Peanut

Use the two lobes gently

The numbered markers identify the parts and setup shown.
  1. First contact lobe
  2. Recessed center
  3. Second contact lobe

Light, supported pressure on permitted areas

  1. Inspect both contact surfaces

    Check the lobes and the join for splits or damage. Identify a stable surface and body area permitted in the supplied instructions.

  2. Maintain your own support

    Place the object with the contact on an allowed soft-tissue area, away from the spine. Control pressure with your own support and make only a small movement if directed.

  3. Lift to reposition

    Remove load from the tool before moving it. Stop for pain, numbness or tingling.

Use for
Light, supported contact with its rounded lobes, in a position shown by the supplied instructions.
Do not use
Direct pressure on the spine, neck, joints or other bony areas. Do not use the tool for standing balance or on injured or irritated tissue.
Check with a professional first
Get professional guidance if you have reduced sensation, fragile bones, or a recent injury or operation that affects the area.
View product

Trigger Point Cane

Grip the shaft and guide the tip

The numbered markers identify the parts and setup shown.
  1. Control the grip
  2. Guide the curved shaft
  3. Rounded contact tip

Controlled reach to permitted muscle areas

  1. Check the contact tip

    Check that the rubber tip is secure and undamaged. Take a steady, supported position before bringing the tool toward your body.

  2. Guide a light contact

    Hold the shaft securely and bring the rounded tip to a permitted muscle area. Use only enough pressure to remain comfortable and in control.

  3. Release before repositioning

    Remove contact before moving to another area. Stop if there is sharp pain, tingling, numbness or unexpected bruising.

Use for
Light, controlled contact with an intact rounded tip on a muscle area identified by the instructions.
Do not use
Front or sides of the neck, the spine, joints, bones and any area that is wounded or newly swollen. Do not lean your body weight on the cane.
Check with a professional first
Speak with a clinician before use if you have a bleeding risk, reduced sensation or a recent injury or procedure near the intended area.
View product

Hands and forearms

Stone Gua Sha Set

A light pass with stone

The numbered markers identify the parts and setup shown.
  1. Rounded edge
  2. Look for chips
  3. Short direction of travel

Forearm and other permitted soft-tissue areas

  1. Inspect the edge

    Choose an intact stone. Run your eye along the rounded edge, checking for chips, cracks or rough spots.

  2. Support the forearm

    Rest the forearm on a stable surface. Use light contact on intact skin. If the product instructions call for a compatible lubricant, follow the label and avoid products that irritate your skin.

  3. Lift and clean

    Make a short, gentle glide and lift to reset. Clean and dry the stone according to its care instructions.

Use for
Light gliding contact with a smooth edge on intact skin where the product instructions permit it.
Do not use
Forceful scraping, irritated or broken skin, bruises and swelling. Stop for pain, bleeding or increasing irritation.
Check with a professional first
Ask a healthcare professional first if you take blood thinners, bruise easily, have a bleeding condition or recently had a procedure in the area.
View product

Fascial Release Tool

The rounded edge in contact

The numbered markers identify the parts and setup shown.
  1. Grip opening
  2. Contoured contact edge
  3. Short controlled glide

Forearm and other permitted soft-tissue areas

  1. Choose a clean tool

    Look over the metal edge and grip. Set the forearm or other permitted area on a stable, comfortable support.

  2. Keep the grip steady

    Hold the tool securely. Bring the broad, rounded edge lightly to intact skin and use a short controlled pass as directed.

  3. Lift before resetting

    Lift the tool away between passes. Stop for sharp pain, irritation or skin marking that concerns you. Clean and dry the tool after use.

Use for
A light, controlled glide with the rounded edge on a permitted muscle area.
Do not use
Digging into soft tissue, applying direct pressure to bones or joints, or working on broken, bruised, inflamed or numb skin.
Check with a professional first
Get professional advice before use if you take blood thinners, have a bleeding disorder or reduced sensation, or are recovering from a recent injury or procedure.
View product

Seated foot routines

Weighted Recovery Ball

Keep weight in the chair

The numbered markers identify the parts and setup shown.
  1. Stable chair station
  2. Matte rubber contact surface
  3. Small movement on the floor

Supported use under a seated foot

  1. Set the ball on a level floor

    Sit on a steady chair and leave your other foot firmly on the floor. Position the ball where you can reach it without leaning or twisting.

  2. Move within a small range

    Rest the permitted part of the sole lightly on the ball. Guide it a short distance with the foot while keeping your weight in the chair.

  3. Remove the ball before standing

    Lift the foot off, then move the ball out of the walk path. Stop for sharp pain, tingling, numbness or a skin change.

Use for
Seated, controlled contact under the foot as directed, with the ball resting on the floor.
Do not use
Standing or balancing on the ball, dropping or throwing it, or applying pressure to a sore, blistered or swollen area.
Check with a professional first
Speak with a foot-care clinician before use if you have diabetes-related foot problems, neuropathy or poor circulation. Seek help for a new wound or unexplained swelling first.
View product

Acupressure Foot Roller

Roll without standing on it

The numbered markers identify the parts and setup shown.
  1. Stable floor
  2. Rounded rubber nubs
  3. Short rolling path

Seated foot rolling

  1. Arrange a steady seat

    Place the roller on a clean, stable floor within easy reach of a chair. Check that the wood and rubber contact points are sound.

  2. Apply light foot contact

    Rest one foot lightly on the roller. Keep weight in the chair and use a short, comfortable rolling movement while the other foot stays grounded.

  3. Clear the floor afterward

    Stop for pain, numbness, tingling or a skin change. Put the roller away before you stand and walk.

Use for
Gentle seated rolling when the sole is intact and the foot can feel and control the contact.
Do not use
Standing on the roller, pressing over blisters or open skin, and using it with cracked wood or missing or damaged rubber nubs.
Check with a professional first
Ask a foot-care clinician before use if you have neuropathy, diabetes-related foot problems, poor circulation, or recent foot surgery.
View product

Support, temperature and travel

Cervical Traction Pillow

Set up a level support

The numbered markers identify the parts and setup shown.
  1. Level base
  2. Shaped support
  3. Removable cover

Supported neck rest, when appropriate

  1. Confirm the intended use

    Read the instructions for this product. If you are considering it for neck symptoms or traction, ask a healthcare professional before starting.

  2. Prepare the specified surface

    Set the pillow on the stable surface named in the instructions and confirm that its base and cover sit smoothly. Use only a supported position approved for you.

  3. Stop if symptoms change

    Remove the support if pain increases or if dizziness, tingling, numbness or weakness occurs. Seek medical advice if symptoms persist or are new.

Use for
Supported rest only in a position allowed in the supplied directions and appropriate for you.
Do not use
Forcing the head backward, adding weights or pulling on the head. Avoid use following a recent head or neck injury or surgery until cleared by a clinician.
Check with a professional first
Ask a clinician before using it for neck pain or traction, or if you have spine problems, fragile bones, dizziness, or neurological symptoms.
View product

Recovery Mat

Give the mat a clear footprint

The numbered markers identify the parts and setup shown.
  1. Keep the floor clear
  2. Unfold the edge fully
  3. Check dry contact with the floor

Floor-based movement and rest

  1. Clear the floor

    Choose a dry, clean, level surface and remove loose objects from your movement path. Handle the mat according to the fold directions supplied with it.

  2. Set down the whole mat

    Unfold it fully. Check for a flat perimeter, a dry top surface and stable contact with the floor before stepping or resting on it.

  3. Dry before storage

    Follow the care instructions for the suede surface and rubber base. Let the mat dry fully and store it using the recommended folds.

Use for
Floor-based personal routines within your ability, on a dry mat that lies securely and flat.
Do not use
Slippery or uneven floors, wet surfaces, curled corners, and standing on a folded edge.
Check with a professional first
The base is specified as natural rubber. If you have a latex allergy or sensitivity, confirm the material with the seller and get professional guidance before contact.
View product

Cold/Hot Therapy Sphere

Check the surface before contact

The numbered markers identify the parts and setup shown.
  1. Stainless steel surface
  2. Stable rest for setup
  3. Cloth barrier

Temperature care exactly as directed

  1. Use the specified preparation

    Inspect the sphere for damage and follow the temperature limits and preparation method named in the manual. Set it down on a stable, dry surface.

  2. Check temperature and protect skin

    Check the prepared surface before contact. Use a dry cloth barrier between a heated or cooled sphere and the skin as directed. Use it only on permitted areas with normal sensation and circulation.

  3. Remove it at the first sign of irritation

    Check the skin during use. Stop for burning, numbness, blotching, unusual color or discomfort.

Use for
Temperature contact only within the preparation, skin protection and time limits in the supplied instructions.
Do not use
Broken skin, eyes, areas with poor circulation or reduced sensation, and use while asleep. Skip any heating or cooling method the manual does not explicitly allow.
Check with a professional first
Ask a healthcare professional first if you have a condition affecting sensation or circulation, a skin disorder in the area, or any uncertainty about safe temperature use.
View product

Travel Recovery Kit

Choose, inspect, and pack dry

The numbered markers identify the parts and setup shown.
  1. Mini foam roller
  2. Compact massage ball
  3. Small basalt tool

Three compact tools for travel

  1. Open on a stable surface

    Set the case down and identify the mini roller, massage ball and basalt tool. Inspect the contact surfaces before use.

  2. Follow the individual guide

    Choose one tool at a time. Follow its own instructions, including the limits for pressure, the permitted contact area, and supported positioning.

  3. Return the objects dry

    Clean and dry each tool as directed. Return it to its fitted slot before closing the case.

Use for
Portable use of one intact tool at a time, with the same care and limits as its individual instructions.
Do not use
Damaged tools and wet storage. Skip any tool whose material or pressure is unsuitable for the area you intend to use it on.
Check with a professional first
Review the separate precautions for the roller, ball or basalt tool. Check with a clinician if a medical condition, injury or medication affects whether you can safely use it.
View product
Read the product safety policy

Explore

Find your object

Prepare an enquiry

Use the form to prepare your question. To reach us, send it directly to the email shown below.

care@sorelinborough.com

Essential functions remain on. Choose which optional purposes you allow.

Your privacy choices

Where applicable, request an opt-out of covered sale or sharing of personal information through Shopify’s privacy features. This choice is separate from optional cookie categories.

You can also send a privacy request to care@sorelinborough.com. See the Privacy Policy for available rights and verification details.

Use guide photo

Foam roller setup photo